Despre noi
Cu o vasta experienta pe parcursul a zece ani de activitate, in special in comercializarea si distributia derivatelor petroliere si petrochimice, ca de exemplu PARAFINA SOLIDA PENTRU LUMANARI, ULEIURI MINERALE, BITUM, ASFALT NATURAL, POLIETILENA, POLIPROPILENA,CAUCIUC SINTETIC.
CHEMIACOM SRL va propune produse de o calitate exceptionala, fabricate atat de noi cat si importate din Iran
Spatiul amplu al depozitului societatii noastre ne-a permis sa fim dealerul nr.1 al produselor petroliere si petrochimice cu origini iraniene.
Politica noastra este satisfacerea celor mai exigente solicitari ale clientilor nostri. CHEMIACOM SRL, un partener avantajos pentru prosperitatea companiei dvs.
Produse
PARAFINA SOLIDA PENTRU LUMANARI |
ULEI AROMATIC |
ASFALT NATURAL ( GILSONITE ) |
BITUM |
PBR |
SBR |
ABS |
ULEI |
POLIMERI |
CAUCIUC SINTETIC |
NEGRU DE FUM |
Comanda
Contact
ADRESA: Str. Radu Beller, nr. 8, Bl.22, Sc.A, Ap.13, sect. 1, BucurestiEMAIL: info@chemiacom.ro
TELEFON/FAX: (+40) 21 231 42 64 , (+40) 720 029 029
PARAFINA SOLIDA PENTRU LUMANARI
PARAFINA TIP A, PARAFINA TIP B, SOLIDA PENTRU LUMANARI
| TIP | CONTINUT DE ULEI % | PUNCTUL DE TOPIRE DEG. C. | CULOARE | AMBALAT IN |
| A B |
2-3 3-4 |
62-64 58-60 |
< 1.0 ALB < 1.0 ALB |
CARTON CARTON |
APLICATII: parafina pentru lumanari, cauciuc, hartie, textile, cabluri
AMBALAJ: IN CUTIA DE CARTON 26 KG +/ - 3%
Comanda Back
ULEI AROMATIC
| SRL.NO. | GRADE | FLASH POINT DEG. C. | DENSITY@15C | KIN.VIS@100C | AVAILABLE IN |
|||
| S104 | RPO | G | L | G | L | G | L | DRUM (Used or New) |
| 240 | 274 | 1.00 | 1.01 | 34 | 44.5 | |||
G: General
L: Laboratory
- 80 Drums /20 FCL
- 90 Drums / Truck
- Net W. / Drum: 207Kg+/- 2%
- Gross W. / Drum: 225Kg +/- 2%
- Container 1 Mt / PE 1060 kg +/-1%
**Application: Rubber process industry, Ink Production industry
Comanda Back
ASFALT NATURAL ( GILSONITE )
| PROPERTY | VALUE |
| ASH CONTENT ( WT%) | 10±2 |
| MOISTURE CONTENT (WT %) | 0.5-1.5 |
| VOLATILE CONTENT ( WT%) | 60-65 |
| FIXED CONTENT | 25-35 |
| SOLUBILITY IN CS2 ( WT%) | 85-90 |
| SOLUBILITY IN TCE (WT%) | 60-70 |
| NORMAL HEPTAN INSOL (WT%0) | 60-70 |
| SPECIFIC GRAVITY@25 | 1.1-1.2 |
| COLOUR | BLACK |
| SOFTENING POINT C | 190-230 |
| PENETRATION @25C/0.1mm | 0-2 |
CHEMICAL PROPERTIES
| TEST RESULT (WT%) | |
| CARBON | 75-82 |
| HYDROGEN | 6-9 |
| NITROGEN | 0.8-9 |
| SULPHUR | 3-6 |
| OXYGEN | 1.5-2.5 |
Comanda Back
BITUM
Bitum 60-80
| Specification Test | Method A.S.T.M. | |
| Specific Gravity at 25/25 DEG C° | 1.01/1.06 | D.70 |
| Penetration AT 25 DEG C° | 60/70 | D.5 |
| Softening Point DEG C° | 49/56 | D.36 |
| Ductility at 25 DEG C° CMS | 100 MIN | D.113 |
| Loss on Heating PCT WT | 0.2 MAX | D.6 |
| Drop in Penetration after Heating PCT | 20 MAX | D.5 |
| Flash Point DEG C° | 250 MAX | D.92 |
| Solubility in CS2 PCT WT | 99.5 MIN | D.4 |
| Organic Matter Insoluble in CS2 PCT WT | 0.2 MAX | D.4 |
| Spot Test | Negative | *A.A.S.H.O T102-42 |
* American Association of State Highway Officials
Bitum 85-100
| Specification Test | Method A.S.T.M. | |
| Specific Gravity at 25/25 DEG C° | 1.01/1.05 | D.70 |
| Penetration AT 25 DEG C° | 85/100 | D.5 |
| Softening Point DEG C° | 45/52 | D.36 |
| Ductility at 25 DEG C° CMS | 100 MIN | D.113 |
| Loss on Heating PCT WT | 0.5 MAX | D.6 |
| Drop in Penetration after Heating PCT | 20 MAX | D.5 |
| Flash Point DEG C° | 225 MAX | D.92 |
| Solubility in CS2 PCT WT | 99.5 MIN | D.4 |
| Organic Matter Insoluble in CS2 PCT WT | 0.2 MAX | D.4 |
| Spot Test | Negative | *A.A.S.H.O T102-42 |
* American Association of State Highway Officials
Comanda Back
PBR
*Raw material
| Typical properties | Test method | UNIT | Value |
| Cis content Raw Mooney Viscosity Volatille Matter Ash Content |
ZEON R-130A ASTM D-1646 ASTM D-1416 ASTM D-1416% |
Wt ML-4 % Wt % Wt |
Min 97 41-49 Max 0.5 Max 0.3 |
** Compound
| Compound Mooney Viscosity Tensile (35 min) Elongation (35 min) |
ASTM D-1646 ASTM D-412 ASTM D-412 |
ML-4 Kgf/ cm2 % |
Max 77 Min 150 Min 440 |
| 300% Modulus at 145° C 25 Min. 35 Min. 50 Min |
ASTM D-412 | Kgf/ cm2 | 68 : 108 74 : 114 74 : 114 |
| Rheometer at 160° C MH ML TS-1 T50 T90 |
ASTM D-3189 | Ibf in Ibf in Min Min Min |
32.0 – 40.0 5.2 – 11.2 2.1 – 6.1 6.0 – 10.4 8.3 – 13.1 |
Compound Recipe
| Raw BR-1220 HAF Carbon (IRB No. 6) Zinc Oxide Stearic Acid Accelerator (TBBS) Sulfur Highly Aromatic Oil Vulcanization Temperature |
ASTM D-3189 | Part ... ... ... ... ... ... °C |
100 60 3 2 0.9 1.5 15 145 |
Other specifications
| Anti Oxidant Catalyst Type Packaging |
Non-staining – High quality Cobalt 35 Kg Bales, Wrapped in 50 Micron LDPE Film & each 30 bales are in a box pallet |
Applications:
It is used for the production of tire, footwear, belts, rubber hoses & other mechanical rubber products.
Comanda Back
SBR
| Property | Unit | Value | Test Method |
| Volatile Matter | WT% | Max. 0.75 | D-1416 |
| Ash | WT% | Max. 1.50 | D-1416 |
| Organic Acid | WT% | Max. 4.75-7.00 | D-1416 |
| Bound Styrene | WT% | Max. 22.5-24.5 | D-1416 |
| Soap | WT% | --- | D-1416 |
| Raw Viscosity at 100 C | ML 1 +4 | 46.0-58.0 | D-1646 |
| Compound Viscosity at 100 C | ML 1 +4 | Max. 84 | D-1646 |
| Tensile Strength (35 min,145 C) | Kg / Cm2 | Min. 250 | D-412 |
| Elongation (35 min,145 C) | % | Min. 350 | D-412 |
| 300 % Modulus (35 min,145 C) | Kg / Cm2 | 167-207 | D-412 |
Applications : Rubber Parts, Vehicle Tires, Foot Wear,Adhesive
Comanda Back
ABS
| Property | Test Method | Test Condition | Unit | Typical Value |
| MFI | ASTM D 1238 | (200 oC/5kg) | Gr/10 min | 1.7 |
| Izod Impact Strength (notched) | ISO 180 | 1/8 inch | kj / m2 | 25 |
| Tensile Strength @ yield | ASTM D 638 | 5mm/min | Kgf /cm2 | 440 |
| Elongation @ Break | ASTM D 638 | 5mm/min | % | 40 |
| Flexural Strength @ Yield | ASTM D 790 | 2.8mm/min | Kgf /cm2 | 640 |
| Flexural Modulus | ASTM D 790 | 2.8mm/min | Kgf /cm2 | 20500 |
| Vicat Softening Temperature (unannealed) | ASTM D 1525 | 5 Kg | oC | 20500 |
| Rochwell Hardness | ASTM D 785 | -- | R-sCALE | 104 |
| Flammability | UL 94 | 1.5 mm Specimen | Recognized | HB |
Packaging
SD-0150 ABS is packed in 3 layer PE bags having a black anti-UV layer , 25 Kg each bag.
Comanda Back